Unbenanntes Dokument

for Potentiometers

Connection of a potentiometer 0...500 Ω bis 0...10 kΩ
Zero adjustable 0...40 %
FullScale adjustable 60...100 %
Easy adjusting by pressing a button
Analog output 0/4-20 mA, Analog output 0-10 V

Universal supply AC/DC 24-240 V
Housing for DIN-rail or wall-mount, 70 mm wide, mounting height 55 mm

		Measuring Transducers

		EC-Declaration of Conformity Measuring Transducers

		Measuring transducers supply a linear output signal which is proportional to the measured value. ZIEHL delivers measuring transducers for input signals DC 0/4-20 mA, Pt 100, thermoelement, resistance and frequency. Output signals are: DC 0/4-20 mA, 0-10 V or frequencies. Frequency signals can be easily evaluated by digital inputs of PLC's. In combination with our check switch/data scanner MUM 8 up to 8 signals can be connected to one input (i.e. display or PLC).

		Overview (PDF)

		for Temperature
			Pt 100, Thermocouples
			Type TMU
			Type TR Limit-Relay at the same time

			with galvanic isolation
			Type MU1000K

		for DC-Current / Voltage (Isolating amplifier)
			with galvanic isolation
			Types MU100U, MU1001K

			with 2 inputs
			Type TR210

		for AC-Current
			Electronic-Current-Transformers

		for Potentiometers
			Type MU100W

		for Resistance
			Type TR122DA

		Limit-Relay for analog signals
			Type STW1000V2

		Measuring-Point Change-over-Switches
			Type MUM

for Temperature Pt 100

protect machines and systems from damage caused by asymmetry in 3-phase power-systems. Monitoring of phase sequence protects against unintentional reverse running of electric motors

	The transducer for motor protection TMU 300 selects the hottest temperature of 3 connected sensors and transduces it into a signal 4-20 mA. It is supplied by a loop 4-20 mA and needs only 2 lines.

	TMU300	sealed-in electronics for temperatures up to 85°C


	TMU100V	Sensor-input 2- or 3-wire with monitoring of break, Measuring range -199...+800 °C, free selectable Easy programming of Zero and FullScale Analog output 0/4-20 mA Analog output 0-10 V Universal supply AC/DC 24-240 V Housing for DIN-rail- or wall-mount mounting height 55 mm, 70 mm wide




for Temperature and DC-current / voltage

	TR210	monitoring of differences in temperature 2 Sensors Pt 100 (RTD), Pt 1000 Thermocouples type B, E, J, L, N, R, S, T Inputs 0/4-20 mA und 0-10 V 2 Relays digital display scalable analog output (Measuring transducer)


	MU1000K	Universal Measuring-Transducer Pt 100 (RTD), DC-current and voltage, insulation-amplifier Potential separation between inputs and outputs Pt 100, 3-wire, -200...+800 °C Ready-configured zeros and spans Easy individual balance by pressing a button Current inputg DC 0/4 - 20 mA Voltage input DC 0/2-10 V Output sinals DC 0/4 - 20 mA, 0/2 - 10 V alle Ein-/Ausgänge in 1 Gerät Universal-Versorgungsspannung AC/DC 24-240 V

for DC-Current / Voltage (Insulating-amplifier)


	MU100U	Universal Insulating-amplifier Potential separation between inputs and outputs Current input DC 0 - 20 mA Voltage input DC 0 - 10 V Output signals DC 0/4 - 20 mA, 0 - 10 V Offset signals 4 - 20 mA can be compensated by the user 1 device for all applications Universal supply voltage AC/DC 24-240 V

	MU1001K	Universal Measuring-transducer for DC-voltages Potential separation between inputs and outputs Voltage-inputs: DC 0-10 V DC 0-300 mV for current measuring with shunt (60/150/300 mV pre-set) DC 0-300 V can be compensated by the user (20/50/100/200/300 V pre-set) Zeros and Fullscales freely selectable Output signals DC 0/ -20 mA, 0-10 V 1 device for all applications Universal supply voltage AC/DC 24-240 V

for AC-Current

Electronic Current-transducers

	STWA1AH	Input AC 0...15 A, output DC 0...20 mA
	STWA2AH	Input AC 0...20/100 A, output DC 4...20 mA
	STWA1FH	Input AC 0...20 A, output frequency 0,5...20 Hz